You can read up to three stories for free.

To view more stories

SUBSCRIBE NOW

(If you're already a subscriber, click here to Login - or click here to Register if you're a first-time user.)
1997 - Volume #21, Issue #4, Page #32
Sample Stories From This Issue | List of All Stories In This Issue | Print this story ]

    «Previous    Next»
Grooved Hack-Sawed Side Of Grease Fittings To Relieve Pressure As You Fill Bearings

Bill Short, Hamilton, Mo: "Hack-sawing a groove in the side of grease fittings to relieve pressure as you fill bearings with grease is an easy way to prevent damage to grease seals. You just cut a groove along one side of the threads. This lets air out as you pump in grease. When grease starts to come out, you stop. It keeps grease from pushing out on the bearing seals.
"I make many of my own replacement parts in my shop. They say inflation is low but it seems the cost of parts goes up 50 to 100 percent a year. Parts which were $4 to $5 three or four years ago now cost $35. One part I recently made cost $75 at the dealer yet cost me only $3.50 to make.
"To do work like this, I've outfitted my shop with lots of metal working equipment. My latest acquisition is a forge, since I need heat for various parts. The forge saves money over using acetylene."
Click here to download page story appeared in.


Order the Issue Containing This Story

All 38 years of back issues are contained on this one DVD-Rom. You can easily look up a specific issue or browse through all of our previous issues at your leisure.


Order DVD-ROM Of All Back Issues
1997 - Volume #21, Issue #4